If your backflip put into a coma or dead, this is what must be done to revive it with this file is returned as it was when you bought your phone, the original factory rom
1. First make sure you have the drivers for your backflip installed on your computer, if not, put it, are right here, look for him.
2. Install RSD lite, here below is the league
3. Turn off the backflip
4. Put the usb cable to computer and phone
5. Open the keyboard and press keys simultaneously and JD Power and drop when they see this screen:
If you have problems getting into the top screen also try simultaneously pressing and JD Power and drop when they see the blue screen and at this point connect the USB cable to the phone and computer.
6. When you enter this mode to install drivers on your machine, wait until the end
7. Open RDS lite
8. When RDS lite open in the bottom you will see that your phone appears
9. Click on the table ... at the top and look down the file (att-motus-viper-etc.)
10. Click start to begin to flash your phone, do not disconnect wait until the end
11. When finished will restart only, wait a few minutes and if they did all good will have his backflip with your original software, see the catch suguiente RSD lite:
- Although this is very safe and I've done this several times without problem. I am not responsible for loss of card data, telephone, or damage to your computer
- If you are flash to return to Android 2.1 to 1.5 ROOT WILL LOSE
League for the picture:
http://www.mediafire.com/?0eya3jzl8ss4e9d
League
RDS lite see 4.8
http://www.mediafire.com/?gecny84w5bi511b
0 comments:
Post a Comment